Expert Answers about Ford F-250 and F-350 Super Duty
- TorkLift Custom Frame-Mounted Camper Tie-Downs 2017 Ford Super Duty
- For a 2017 F-250 Super Duty with an 6-3/4' bed the needed tie-down for the front is, # TLF2022 or the # TLF2021 for an 8' bed. This is different than the needed front tie-down for a 2017 Ram which would use the, # TLD2127 be it a short or long bed Ram.
For the 6-3/4' or 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch you would want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, # TLF3008
view full answer... - Availability of Grille Guard with Winch Mount for 2005 Ford F-250/F-350
- I recommend the Westin Sportsman Grille Guard # 40-1645
The only option to mount a winch on the front of your truck is to add a custom front mount hitch part # 65022 and then add a winch mount like # BDW20011. You'll want to install the hitch before you install the grill guard. There aren't any options for a grill guard with an integrated winch mount plate available for the 2005 Ford F-250/F350 Super Duty.
view full answer... - Roadmaster Rear Anti-Sway Bar for 2007 Ford F-250 and F-350 Super Duty Dually
- The Roadmaster Rear Anti-Sway Bar, # RM-1139-165 is a confirmed fit for the 2007 Ford F-250 and F-350 Super Duty Dually. Please take a look at the linked installation video for further details. This has a bar diameter of 1-1/2" constructed of thick 4140 chromoly steel. There also the option of the # RM-1139-170 for F-250 & F350 Super Duty Trucks, but the # RM-1139-165 is the only option available for DRW models. Not all aftermarket components are shaped and fit exactly the same as the...
view full answer... - Installation Kit for Reese Elite Series 2007 Super Duty
- The Reese Elite Series 5th Wheel Trailer Hitch # RP30871 is a custom fit part designed to fit with the OEM installed puck system on 2011 and newer Ford Super Duty. Currently we do not have a kit to retrofit your 2007 Super Duty.
view full answer... - Plug and Play Trailer Connector for 2003 Ford F250
- A plug-in type, or T-1 connector is not available for the 2003 F250. The harness you have looked at, part # 18252 is the only harness offered.
Installing this item is very simple. The white wire grounds to the truck frame, the yellow wire would tap into the wire feeding the left directional/brake light, the green wire taps into the wire feeding the right directional/brake light, and the brown wire taps into the running light circuit. Accessing the rear of each taillight assembly provides...
view full answer... - Availability of Heavy Duty Front Coil Springs For 2011 Ford F-550
- For the 2011 Ford F-550 the stock front coil spring has a weight capacity of 3,150 lbs.
I have the Super Springs Front SuperCoils - Extra Heavy Duty, part # SSC-34, which has a weight capacity of 5,060 lbs and will increase the ride height by 1 inch.
Super Springs also has the Front SuperCoils - Extra Heavy Duty, part # SSC-35, which has a weight capacity of 7,700 lbs and will increase the ride height by 2-1/2 inches.
The Super Springs SuperCoils will not increase the vehicles weight-carrying...
view full answer... - Swiveling Skid Wheel Recommendation for 2018 Jayco North Point
- The only solution we offer that covers most of what you said you need is the Ultra Fab Skid Wheels part # UF48-979013. This is the only swiveling solution that's going to work on an RV that's longer than 34 feet like your 2018 Jayco North Point. The brackets of these need to get welded to the frame though and then from there the wheel assemblies get bolted to them.
view full answer... - Availability of Red Version of the Amber Clearance Light # MCL44AB
- Yes, the red version of the # MCL44AB is the part # MCL44RB.
view full answer... - Custom Fit 2008 Ford F-250 Super Duty Slide Over Mirrors
- We do offer slide over towing mirrors for the 2008 F-250. They are made in the USA. For a pair of mirrors, we have the # LVT-2600 which are custom fit slip on towing mirrors.
view full answer... - Availability of Pigtail Hose Without Back-Check
- We do have the MB Sturgis Sturgi-Stay Propane Fill Hose # 100019-24 which doesn't have a back-check. This pigtail has a POL fitting on one end and then a 1/4" male inverted flare on the end that connects to your regulator so if you already have an adapter in the regulator you'll need to remove it to use this pigtail.
Please note that when used as part of a dual-cylinder setup, this will not be RVIA compliant. The adapter fitting # 204120-MBS would need to be purchased (which has the back-check)...
view full answer... - Is A Flash Self-Locking Aluminum Ball Mount For 2-1/2 Inch Receiver Available?
- I contacted the manufacturer and there is not a Flash self-locking, aluminum ball mount available like Item # DTLBM9200 in a 2-1/2 inch size. Other options are available but they would be like the Flash E Series HD Adjustable 2-Ball Mount for 2-1/2 inch Hitch, Item # FA42-00-2625. If you wanted a hitch lock then you would need
something like Item # FA86-00-3685.
I have attached links to our available inventory and to a video for you to check out.
view full answer... - Are Helper Springs Available for a 1999 Ford F-350 with a 4 Inch Lift
- First, we need to find out how your truck is configured. The 4 inch lift kit will not be a problem as long as your truck has not been fitted with aftermarket springs with the lift kit. In this case I would recommend that you go with a set of Super Springs, see link. The Super Springs will be working at all times to prevent body roll and enhance the suspensions ability.
If your truck has dual gas tanks, some of the 1999 models still had this option, you will need to go with a shorter set...
view full answer... - Availability Of Wire Basket E-Track Mounts
- I have another option for you, but the mounting brackets used to mount a wire basket on an e-track or x-track rail are not sold separately.
To mount a basket on your e-track or x-track rails you will want the CargoSmart Wire Basket for E-Track and X-Track Small # 3481720, Medium # 3481719, or Large # 3481718.
Each of these options includes the required brackets to mount the baskets to your e-track or x-track rails.
I included a video of the CargoSmart Baskets for you to take a look at.
view full answer... - Extra Long Ball Mount to Allow Installation of Towtector Debris Guard on F-350
- It sounds like you are looking for a longer ball mount to use in your hitch to allow installation of the Towtector debris guard.
I have linked you to our page for extra long 2-inch 10K ball mounts.
For a 2-inch size we offer the Brophy # BH20 which measures 13-1/4-inches from the center of hitch pin hole to the center of the ball hole and either 3/4-inch rise or 2-inch drop. There are longer ball mounts but they do not have the 10K rating you need.
view full answer... - Difference In Pintle and Regular Mount, and Availablity of Pintle Mount For 2011 Ford F-350
- A pintle hitch ball is designed to be used with trailers that use Lunette Rings, a regular or conventional hitch ball is designed to be used with trailers that have couplers. You would typically find trailers with Lunette Rings on industrial or construction type trailers.
For a pintle towing setup, you will need a pintle draw bar, pintle ball, pin and clip, wiring, and brake controller.
For a draw bar, I would recommend Titan Forged Pintle Hook Mounting Plate, part # RP45294, which will...
view full answer... - Recommended Running Boards for 2005 Ford F-350 with Crew Cab
- We offer running boards from several manufacturers that will fit your 2005 Ford F-350 with Crew Cab. Products from Bestop, Dee Zee, Rampage and Westin can be seen by clicking on the link provided for you.
The available running boards are offered in various finishes including black, black with silver trim, chrome and matte finish aluminum, among others. You also have a choice of widths, ranging from 4-inches up to 7-inches. You can even choose lighted steps such as the Westin's # 27-0025-1215...
view full answer... - Keyed-Alike Trailer Coupler Locks
- WE have many coupler locks that can be ordered wit the same lock core so that one key will work on all of them. You can see all such items on the linked page, such as Fastway Universal Trailer Coupler Lock # FA86-0015-318. This fits 1-7/8-inch, 2-inch and 2-5/16-inch couplers.
Once you choose your preferred lock just select the Keyed Alike option which is above the yellow Add to Cart button. There is a small upcharge for this keyed-alike option.
view full answer... - Fifth Wheel Hitch Recommendation for a 2013 Ford F-250 Short Bed with B&W Turnover Gooseneck
- We sell the adapters that Lippert is referring to like part # CAB-C5G and we are aware of that warranty stipulation they have on their frames, but we personally haven't seen the frame damage that they are warning against.
Since it sounds like you have a 2013 Ford F-250 short bed with a G and W gooseneck hitch installed like part # BWGNRK1111 your best solution is going to be the B and W Slider Companion part # BWRVK3400. Not only will this not void your trailer warranty...it will give...
view full answer... - Measuring Bolt Pattern for Wheels on Military Trailer
- We do have a large selection of trailer wheels that feature a 6 on 5-1/2 inch bolt pattern, but not a 6 on 5 inch pattern like what you mentioned in your question.
I recommend verifying this measurement on your existing trailer wheels. Since you have an even number of lugs, you will just want to measure center-to-center on lugs directly across from each other.
I have attached a link that will take you to our available wheels that have a 6 on 5-1/2 inch bolt pattern. You can use the facets...
view full answer... - What Other Goose Neck Hitch Ball Sizes Are Available Besides The 2-5/16"?
- We have only seen gooseneck hitch balls that are 2-5/16" and 3". If you're looking for a Curt fifth wheel to gooseneck adapter like the Curt # 16085 that has a 3" ball we have part # 16055. Included is the review video for reference.
view full answer...
Go To Results